I was in need of a shorter jacket to wear with my new Colette Meringue skirt (and jeans, and capris, and slacks – you get the idea!).  This Project Runway inspired pattern, Simplicity 2728, was the answer.



Worn with my Colette Meringue skirt – beautiful, bright spring colors make me happy   🙂

Here it is with skinny, black corduroy pants, which is more weather appropriate since *sigh* it is raining and snowing here today:

Speaking of lining, I really like the way this pattern has a facing that goes around the entire outer edge of the jacket, so the lining is attached completely to the facing (no messy hemming – well, my hemming is usually messy anyway!).  The facing is then sewn onto the outer edges of the jacket.  It gives such a nice, clean finished edge around the whole inside of the jacket.

Before sewing the lining to the facing, part of one side seam in left open for turning.

After sewing the facing, with lining attached, to the outer jacket, the open side seam in the lining can easily be hand sewn closed.

I used an itty bitty overcast stitch to close up the opening in the lining

I prefer to wear my sweaters and jackets buttoned just below the bust line and not all the way down to the hem, so I added only one button to the front of this jacket.  Why add all those buttons and buttonholes is I’m not going to use them?

The Colette Meringue Skirt pattern is definitely appropriate for beginning sewers.  It is a basic, straight forward skirt pattern with only two main pattern pieces (front & back) and a few facing pieces.  If you are opposed to waist facings (and most other facings) as I am, then you could eliminate the waist facing by inserting a lining.  I did not choose to line my skirt because, well, let’s face it – I got lazy and didn’t feel like the extra step!  A hidden side zip is used for the closure.  The scallop hem is the eye catching design element in this pattern.  But I won’t kid you, it was a pain in the rear to trim, clip, and press those scallops.  Just be patient and it is worth the effort.

I apologize for not modeling my skirt myself, but the lighting outside is most conducive to decent photos and it is just too dang cold out there (I’m talking single digits) to be modeling a skirt and sleeveless tank without a coat over them.  That said, I have plans to make a pink jacket to go with this ensemble.  Once that is done, I will model the entire outfit.  Until then, here is a picture of how I’m thinking to style it sans pink jacket:

The sleeveless top is Simplicity 1806.

Last week, I posted my hesitancy about the fabric I was contemplating for this Meringue Skirt.  Boy am I glad I went ahead and used the Anna Maria Horner velveteen.  Thanks for the encouragement, Judith.  I have to admit, I adore this fabric.  It is such a gorgeous, bold print and I’m glad I stepped out of my comfort zone to use such a statement fabric.  I cut the front and back pattern pieces using the flat method, so I could line them up to have identical prints coming and going.  The velveteen was very easy to sew.  But I did take extra precautions when pressing so as to not crush the pile of the velveteen and so imprints from the seams would not show through on the right side of the fabric.  The pattern instructions called for the waist and hem facing pieces to be cut using the same fashion fabric.  Because the velveteen fabric has just a little bulk to it, I decided to use poly lining fabric for the facing pieces.  It worked out great because those areas are not bulky at all and the skirt lays nice and flat around the waist and tummy area.  I can’t wait to sew up the jacket so I can wear my new outfit.

If you’ve not tried any of the Colette sewing patterns yet, I encourage you to give them a try.  The instructions are very well written and the sizing is pretty much the same as RTW.

Pam

My Meringue Skirt muslin fit great everywhere except the length.  I decided to add 2 inches to the pattern and now I’m ready to go!  The fabric I decided on (I think) is a velveteen print by Anna Maria Horner.  My only reservation is that it is quite a large, bold print and I usually go for something a bit more reserved.  I will have to pay special attention to the cutting layout since it has a nap and and one way print.  Ugh!!!  IMO, cutting is the most dreaded part of sewing.  The rest is fun.  🙂

I would welcome any and all comments on your experience sewing with velvet or velveteen and/or bold prints.  It is with a bit of trepidation that I move forward with this fabric decision.  Thank you for any pointers you wish to share.

Pam